How to Use the Vap Max W3 Kit: A Beginner’s to Pro Guide Updated in (2024)

The Vap Max W3 kit is a great starter vape for beginners looking for an easy to use and affordable vaping option. This straightforward device makes switching from traditional cigarettes to vaping a breeze.

In this beginner’s guide, we’ll walk through all the steps for setting up How to Use the Vap Max W3 Kit and using it properly so you can start enjoying smooth, flavorful vapor.

How to Use the Vap Max W3 Kit

Getting to Know the Vap Max W3

Before diving into usage, let’s get familiar with what’s included in the kit:

  • Vap Max W3 Mod – The mod houses the 650mAh battery and lets you adjust wattage up to 25W. It has an oval fire button and two adjustment buttons in a compact, portable size.
  • 2mL Tank – The included tank has a convenient top-fill design and uses Vap Max W3 1.0ohm atomizer coils. It connects via 510-threading.
  • USB Charger – The Vap Max W3 utilizes a micro USB port for charging the built-in battery.
  • Spare Coils – The kit includes extra 1.0ohm Kanthal coils for when replacements are needed.
  • User Manual – The manual provides guidance on the proper use of the device. Review it to ensure optimal performance.
  • Lanyard – The included lanyard lets you wear the mod around your neck for easy portability.

Getting Started With Your Vap Max W3

Once you’ve familiarized yourself with the kit contents, it’s time to get set up for first use.

Charging the Battery

As with any vape device, the first step is to fully charge the battery before initial use. Here’s how:

  • Locate the micro USB port on the side of the Vap Max W3 mod.
  • Plug the included USB cable into the charging port and connect the other end to a power source like a laptop or wall adapter.
  • The indicator light around the fire button will glow red to indicate charging status.
  • Allow 1-2 hours for the initial charge. The light will turn green when fully charged.

Pro Tip: Avoid overcharging the battery. Once the light turns green, disconnect the charger. Overcharging can diminish overall battery life.

Priming the Coil

The Vap Max W3 comes with a 1.0ohm Kanthal coil already installed in the tank. This coil uses organic cotton wicking to absorb e-liquid. Before first use, you must prime the cotton to avoid dry hits.

Here’s how to properly prime the coil:

  • Add 4-5 drops of e-liquid directly onto the exposed cotton wicking ports located on the sides of the coil.
  • Let the e-liquid soak into the cotton for 10-15 minutes. This gives time for the cotton to become fully saturated.
  • The cotton should look wet, but not be dripping with excess e-liquid. Avoid over-saturating.

Properly priming coils preps the wicking to prevent dry hits that taste unpleasantly burnt. Always prime every new coil.

Filling the Tank

Once the coil is primed, it’s time to fill the tank with e-liquid. The Vap Max W3 uses a top-fill design that makes filling easy.

To fill the 2mL tank:

  • Unscrew the top cap counter-clockwise to expose the fill port.
  • Using the included dropper, fill the tank with your chosen e-liquid flavor and nicotine level. Stop filling at the 2mL mark.
  • Replace the top cap and turn it clockwise to secure.

Let the tank sit for 10-15 minutes after filling and priming so the coil fully saturates before taking your first draw.

Using the Vap Max W3

You’re now ready to start vaping! Here’s how to use the device:

  • Press the fire button 5 times rapidly to power on the Vap Max W3.
  • Start at a low wattage around 10W by pressing the adjustment buttons. Slowly increase wattage to find your preferred vaping power.
  • Press and hold the fire button to take a 3-5 second draw. Inhale slowly, like sipping a drink.
  • Limit draw length to 10 seconds maximum to avoid overheating and diminish flavor.
  • Close the airflow when not in use to prevent leaks.

Adjust the wattage incrementally to find your optimal settings that produce the vapor amount and throat feel you enjoy. Don’t exceed the coil’s recommended wattage.

Maintaining Your Vap Max W3

Like any vape device, performing proper maintenance is key to keeping your Vap Max W3 in top shape.

Changing the Coils

The Vap Max W3 1.0ohm coils are designed to last 1-2 weeks with standard use before needing replacement. You’ll know it’s time for a new coil when vapor quality and flavor declines noticeably.

Here are the steps to change coils:

  • Unscrew the base of the tank to access the coil. Gently turn counterclockwise to detach the used coil.
  • Discard the old coil properly in the trash. Never attempt to reuse coils.
  • Prepare the new coil by adding 4-5 priming drops of e-liquid directly onto the cotton wicking.
  • Securely screw in the replacement coil by turning clockwise.
  • Refill the tank and let sit for 10-15 minutes before resuming use to allow the cotton to saturate.

When breaking in a new coil, start at a lower wattage around 10W for the first few hours of use. Gradually increasing the wattage can extend the coil’s lifespan.

Cleaning the Tank

For best performance, clean your Vap Max W3 tank every 1-2 weeks as follows:

  • Remove coil and empty all e-liquid from tank.
  • Rinse the tank parts including the glass, base, and mouthpiece with warm water to remove residue.
  • Allow components to air dry fully before reassembling.
  • Inspect o-rings and threading for damage. Replace worn o-rings and clean contacts with rubbing alcohol.

Proper cleaning removes lingering flavors when switching e-liquids and keeps the tank functioning properly.

Battery Care Tips

To maximize your Vap Max W3’s battery life:

  • Avoid depleting the battery completely before recharging. Charge more frequently versus waiting until empty.
  • Don’t leave on the charger after the light turns green or overcharge the battery.
  • Allow to fully discharge about once per month before recharging to calibrate the battery.

Following these battery care guidelines enhances performance and extends overall lifespan.

Troubleshooting Common Problems

If you experience issues with your Vap Max W3, try these troubleshooting tips:

No vapor production

  • Check battery charge level and power on device
  • Confirm tank is filled with e-liquid
  • Try re-priming coil or replace if expired
  • Verify coil fully contacts base when screwed in
  • Increase wattage in 5W increments

Harsh, dry, or burnt taste

  • Replace old coil with a new prime coil
  • Avoid overfilling tank and flooding coil
  • Break in new coils slowly starting at low wattage

Leaking from airflow

  • Inspect for damaged coils allowing excess liquid into base
  • Ensure tank assembled properly with no gaps
  • Replace worn or missing o-rings
  • Close airflow when not in use

Spitting and popping

  • Blow into tank gently to remove flooded coil
  • Lower wattage
  • Replace oversaturated coil
  • Avoid overfilling tank

Tips for the Best Vaping Experience

To become an expert Vap Max W3 user, keep these tips in mind:

  • Gradually increase wattage on new coils over several hours to extend lifespan
  • Take shorter, slower draws for optimal flavor
  • Close airflow when not vaping to prevent leaks
  • Let low coils rest in e-liquid for 10 minutes before vaping to prolong use
  • Keep spare coils on hand for quick change-outs when vapor declines
  • Clean tank thoroughly when switching e-liquid flavors
  • Consider lowering nicotine levels over time to reduce dependence
  • Review battery safety and properly dispose of old batteries

Filling the W3 Tank

The W3 kit comes with a 2ml capacity tank that uses replaceable atomizer coils. Before first use, prime the coil by putting a few drops of e-liquid directly on the cotton wicking holes. This helps saturate the coil to prevent dry hits.

To fill the tank, unscrew the top cap and use the included dropper to fill with your preferred e-liquid flavor and nicotine strength. Avoid overfilling – stop at around the 1.8ml mark. Then replace the cap and allow the tank to sit for 5-10 minutes so the coil can fully absorb the e-liquid.

How to Use the Vap Max W3 Kit

Changing the W3 Coils

The W3 kit uses Kanthal 1.0ohm coils designed for mouth-to-lung vaping. These coils should be changed every 1-2 weeks with average use.

To change the coil, unscrew the base of the tank and detach the used coil by gently unscrewing it. Prime the new coil with a few drops of e-liquid. Securely screw in the replacement and reassemble the tank before refilling with e-liquid.

Let the tank sit for at least 10 minutes after changing coils so the cotton can become fully saturated. Start with low wattage (around 10W) when using a new coil for best results.

How to Use the Vap Max W3 Kit

Adjusting the Wattage

One advantage of the W3 kit is the ability to adjust wattage based on your preferences. Using the adjustment buttons, you can set the power between 5-25W.

For the 1.0ohm coils, we recommend keeping the wattage on the lower end between 8-15W. Start at 10W and adjust up or down to find the sweet spot. Lower wattage produces a tighter draw while higher wattage creates more vapor.

Troubleshooting Common Issues

If you experience any problems with your Vap Max W3, here are some tips for troubleshooting:

  • No vapor production – First ensure the tank is filled and the coil is properly saturated. Try increasing the wattage slowly. If issue persists, the coil may need to be replaced.
  • Harsh or burnt taste – This typically indicates the coil needs to be changed. Prime the new coil well and start at a low wattage.
  • Leaking – Check that the tank is assembled correctly with no gaps. Make sure the airflow holes are fully closed when not in use. Examine the coil for damage or flooding.
  • Spitting and popping – Try adjusting the wattage higher or lower. If the issue continues, the coil may be oversaturated or flooded. Replace the coil.


Switching to vaping can be intimidating for beginners, but the user-friendly Vap Max W3 kit makes the transition easy and enjoyable. By following the tips outlined in this all-encompassing guide, any new vaper can become a pro at setting up, using, maintaining, and troubleshooting their Vap Max W3.

With proper battery charging, coil priming, tank filling, wattage adjustment, component cleaning, and regular coil replacements, you’ll be able to keep your vape performing optimally for the best vaping experience. Mastering these fundamentals allows you to get the most out of your Vap Max W3 so you can leave cigarettes behind and discover the versatility of vaping.

People also ask

With proper maintenance, the 1.0ohm W3 coils typically last 1-2 weeks of average use before needing to be replaced. Signs it’s time for a new coil include decreased vapor, muted flavor, and increased dry/burnt hits.

The W3 kit works well with 50/50 or 60VG/40PG e-liquid. Higher VG blends are thicker and may not wick efficiently on this coil. Avoid e-liquids over 70% VG for best performance.

Rinse the tank and parts with warm water, avoiding getting water in the air tubes. Wipe pieces dry before reattaching. Change coils frequently to keep the tank clean.

If the battery level is low, the light around the fire button will flash rapidly when firing. Recharge the battery for uninterrupted use. Flashing can also indicate an issue with the tank not making a complete circuit.

Yes, the W3 kit can be used for vaping CBD e-liquids. Be mindful of the VG/PG ratio and wick efficiently for thicker CBD juices. Start at a low wattage and increase slowly for the best experience.

Some Related Articles You Might Like

Leave a Comment